Nespresso capsule dispenser holder

uploaded by: larsac07

on April 1, 2012

Views:	2771
Downloads:	1417

Download Model ▼

Organize

No ratings

See ratings and reviews
Rate this model

A sketch for this easter's garage project. Just bought a Nespresso machine and coffee for half a year, so I figured, hey, let's not use that extra $60 on a pretty simple dispenser. Forgot to check the right dimensions, so it needs a little ajustment.. Borrowed the capsule model from a.j.uknow, hope that's OK. If not, I'll remove it, and try to make my own. [EDIT]: Fixed the dimensions of the capsule boxes and capsules. Should be exactly 1:1, +/- 2mm. Also, edited angle of capsule tray (where the capsules come out). Can't wait to get to it [EDIT2]: Now all panels are exactly 1cm thick, and the spacing between each capsule box is also 1cm. Easier to measure. [EDIT3]: The "brushed steel-plate" will be a piece of a 2mm thick aluminium plate cut out using a hacksaw for metal. It isn't brushed yet, so I'll treat it as follows: 1) brush horizontally with sandpaper 40, then 120, 2) wipe horizontally with general purpose leather hand pads, and then ultra fine leather hand pads. I'll just glue the aluminium plate to the front wood-panel, and then glue the Nespresso logo printed out on photo paper or fine cardboard to the plate. Will add photos of the finished product when it's done.

Report a policy violation